Reasons why the stainless steel reactor ±£≤does not operate

Release time:

Source:

Reasons why the stainless steel reactor does not operate
Reasons why the stainless steel reactor does not operate

The gate valve of the stainles≤♠±"s steel reactor is opened improperly or the ©↓♣₽valve is opened and closed in the wrong order, ca☆α₽ using the working pressur γ₩<e of the device to be too high or the steam ☆βto flow backwards. Condensate  ≥αis not discharged in time or there iγ÷σβs a problem with the aφσ€♠ctual operation, thus causing the deviδ≤↔®ce to be able to withstand the pres ≠sure in actual operation. Because the ≈®€refrigeration compressor₩↓ will be pumped in actual operatα±σion, gas will enter the u∏≈nit and create an expl₹☆"©osive mixture. Turning off• ↔ the pumps prematurely will c‍×"‌ause localized overheating of α₹♣πthe unit to melt and rupture. Put✘≈ting inappropriate feedstock into the wrong fee☆$dstock causes thermal cracking a&¶₩nd bursting during the ‌₩★♠purchase process.

　　If the stainless steel reactor is not remove€α¶​d or replaced, the test will opσ ✔erate or close the vent>♣ to the reactor to avoid an explosion. Wor∏‌king pressures and leak ✘ tests are flammable. No fire analysis, no f®"♣←ire, no fire. Valves π×♦and flange base bolts shall be tightened at worφ ¥↓king pressure.

　　Improper sealing of the valve•↔✘s throughout the ins§♠™tallation of the stainless steel reactor uniλβ♦t has caused leakage of flammable ♦" gases. Failure to clear the precε↔'↔ipitation in time will c ☆ause the electric heating and reaction pipe to be↑​ blocked, causing the vacuum value of the dev"®φice to rise. The gas eπ↔☆εnters the gas line throug​♠ h the exhaust valve, which w‌×ill generate explosive mixture at γ≈←higher temperature, or lea ★&¶d to charcoal fire and explosion.

　　Reasons why the stainless steel reactor can notΩ←₽ run

　　1、When operating the s≈→​φtainless steel reactor, forbid any metal or so&✘•<lid material to fall into the stainless♠•λ₽ steel reactor to avoid causing damage ≤→ to the vessel wall;

　　2, turn on the power to make the mixer runniε  ng, observe whether the€πΩ reducer, mixer and o♣Ωther transmission parts a→α ♥re abnormal;

　　3、The pressure and temperature of the jacket₹→π or inner tank need to rise and fall slowl♠Ω☆y to avoid expansion of the inner w"β→"all caused by the cold and heat shock of✔÷φ  the stainless steel reactor, and it is str→ ☆ ictly forbidden to approach or exceed the σ₩ ₹ultra-high allowable₩← working pressure and ultra-hig♥₹♠h allowable working temperature of the equipmen∑★§t.

　　4, when the discharge outlet is blocked by&¥≈  viscous substances, it is prohibited t↓♦∑o open with metal tools to avoid damage to t•★he inner wall.

　　5、After the discharge ↔α€is completed, the material attached to t‌≠he stainless steel reactor should b‍Ω e cleaned, while payiλ↓ng attention to the temperature change.

Congratulations to the webσ₹site of Jiangsu Chang× rong Chemical Equipment β✔♦δCo.,ltd

下(xià)一(yī)頁

Related news

What is liquid flooding, flooding tower and flu<∞shing tower?

Distillation tower operation, liquid flooding,©π flooding tower, flushing tower is →☆≠often silly, they appear when theδ​ < tower parameters change response is not sen®¥sitive, which often delays the s•©•βolution to the problem, affecti♦‌↔∏ng the production of the device.

Have you really mastered §≥‌ all the knowledge of heat exchangers?

A heat exchanger is a  £ device that transfers some of the heat from a ho≈§t fluid to a cold fluid, i.e., a large c★™↕losed vessel filled withβ ★ water or other media,₩→ while having pipes running through it✔£∑‌. The hot water is all≤λ₩owed to flow through the pi∞σφ pe.

Reactor Stirrer Basics

The stirrer is one of the key components of ↓εthe reactor. Choosing the appropr"≈±$iate stirrer according to the p∏↕hysical properties, ∞₹∏capacity and stirring purpose of differe"•nt media in the kettle γ±can play a great role in promo★₹↔∏ting the speed of chemical ‌♥>reaction and improving the produ≤π↔ction efficiency.

Pressure vessel rework π∑λwelds, the same part of the rework more than 2 t×↑imes qualified?

Weld rework during the manufacturing pro§≥↑βcess cannot be completely avoide∑≥♠βd. In order to ensure the quality of ©α→welding rework, there are several '¶₽₩requirements as follows.

Reasons why the stai☆Ω∑nless steel reactor does not operate

If the stainless steel reactor is not >λ∑Ωremoved or replaced, the₽↕' test will operate or close the vent to the § reactor to avoid an explosion. W×≠orking pressures and lε≠eak tests are flammable. No fire anal​¥¶ysis, no fire, no fire. Valves and π∑flange base bolts shall ✘&↕be tightened at working pressure.